symbol v dss i d i dm v gs v gsm p d t j ,t stg t l i ar e ar e as static electrical characteristics maximum ratings all ratings: t c = 25c unless otherwise specified. caution: these devices are sensitive to electrostatic discharge. proper handling procedures should be followed. 050-5894 rev e 8-2003 characteristic / test conditions / part numberdrain-source breakdown voltage (v gs = 0v, i d = 250 a) on state drain current 2 (v ds > i d (on) x r ds (on) max, v gs = 12v) drain-source on-state resistance 2 (v gs = 12v, 24.5a) zero gate voltage drain current (v ds = 600v, v gs = 0v) zero gate voltage drain current (v ds = 480v, v gs = 0v, t c = 125c) gate-source leakage current (v gs = 30v, v ds = 0v) gate threshold voltage (v ds = v gs , i d = 2.5ma) min typ max 600 49 0.125 25 250 100 24 unit volts amps ohms ana volts symbol bv dss i d (on) r ds (on) i dss i gss v gs (th) apt website - http://www.advancedpower.com linear mosfet linear mosfets are optimized for applications operating in the linearregion where concurrent high voltage and high current can occur at near dc conditions (>100 msec). higher fbsoa higher power dissipation popular t-max? or to-264 package parameterdrain-source voltage continuous drain current @ t c = 25c pulsed drain current 1 gate-source voltage continuousgate-source voltage transient total power dissipation @ t c = 25c linear derating factoroperating and storage junction temperature range lead temperature: 0.063" from case for 10 sec. avalanche current 1 (repetitive and non-repetitive) repetitive avalanche energy 1 single pulse avalanche energy 4 unit volts amps volts watts w/c c amps mj apl602b2-l (g) 600 49 196 3040 730 5.84 -55 to 150 300 4950 3000 t-max ? to-264 b2 apl602b2 (g) apl602l (g) 600v 49a 0.125 ? ? g d s l *g denotes rohs compliant, pb free terminal finish. downloaded from: http:///
dynamic characteristics apl602b2-l(g) 050-5894 rev e 8-2003 symbol c iss c oss c rss t d (on) t r t d (off) t f min typ max 7485 9000 1290 1810 617 930 13 26 27 54 56 84 16 20 unit pf ns test conditions v gs = 0v v ds = 25v f = 1 mhz v gs = 15v v dd = 300v i d = 49a @ 25c r g = 0.6 characteristicinput capacitance output capacitance reverse transfer capacitance turn-on delay time rise time turn-off delay time fall time thermal characteristics characteristicjunction to case junction to ambient symbol r jc r ja min typ max .17 40 unit c/w 1 repetitive rating: pulse width limited by maximum junction 3 see mil-std-750 method 3471 temperature. 4 starting t j = +25c, l = 2.50mh, r g = 25 , peak i l = 49a 2 pulse test: pulse width < 380 s, duty cycle < 2%apt reserves the right to change, without notice, the specifications and information contained herein. note: duty factor d = t 1 / t 2 peak t j = p dm x z jc + t c t 1 t 2 p dm 10 -5 10 -4 10 -3 10 -2 10 -1 1.0 rectangular pulse duration (seconds) figure 1, maximum effective transient thermal impedance, junction-to-case vs pulse duration 0.180.16 0.14 0.12 0.10 0.08 0.06 0.04 0.02 0 0.5 0.1 0.3 0.7 0.90.05 z jc , thermal impedance (c/w) single pulse figure 1a, transient thermal impedance model 0.05750.113 0.0187f0.358f power (watts) rc model junction temp. ( c) case temperature downloaded from: http:///
050-5894 rev e 8-2003 typical performance curves apl602b2-l i d , drain current (amperes) i d , drain current (amperes) 120100 8060 40 20 0 120100 8060 40 20 0 0 50 100 150 200 250 0 5 10 15 20 25 30 v ds , drain-to-source voltage (volts) v ds , drain-to-source voltage (volts) figure 2, high voltage output characteristics figure 3,low voltage output characteristics 7 v 6 v 6.5 v v gs =10v, 15 v 5.5 v 7 v 6 v 6.5 v 5.5 v 7.5 v v gs =10, 15v 7.5 v 8 v 8 v i d , drain current (amperes) i d , drain current (amperes) (normalized) bv dss (on), drain-to-source breakdown r ds (on), drain-to-source on resistance voltage (normalized) v ds > i d (on) x r ds (on)max. 250sec. pulse test @ <0.5 % duty cycle t j = +125c t j = +25c t j = -55c v gs =10v v gs =20v normalized to v gs = 10v @ 29a v gs , gate-to-source voltage (volts) i d , drain current (amperes) figure 4, transfer characteristics figure 5, r ds (on) vs drain current t c , case temperature (c) t j , junction temperature (c) figure 6, maximum drain current vs case temperature figure 7, breakdown voltage vs temperature 0 2 4 6 8 10 0 20 40 60 80 100 120 25 50 75 100 125 150 -50 0 50 100 150 1.301.20 1.10 1.00 0.90 0.80 0.70 1.15 1.10 1.05 1.00 0.95 0.90 8060 40 20 0 5040 30 20 10 0 apl602b2-l(g) downloaded from: http:///
c rss c oss c iss operation here limited by r ds (on) t c =+25c t j =+150c single pulse 100s1ms 10ms 100ms apl602b2-l 050-5894 rev e 8-2003 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244) 4.50 (.177) max. 19.81 (.780) 20.32 (.800) 20.80 (.819) 21.46 (.845) 1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055) 5.45 (.215) bsc 2.87 (.113) 3.12 (.123) 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 2.21 (.087) 2.59 (.102) 0.40 (.016) 0.79 (.031) drain source gate these dimensions are equal to the to-247 without the mounting hole. drain 2-plcs. 19.51 (.768) 20.50 (.807) 19.81 (.780) 21.39 (.842) 25.48 (1.003) 26.49 (1.043) 2.29 (.090) 2.69 (.106) 0.76 (.030) 1.30 (.051) 3.10 (.122) 3.48 (.137) 4.60 (.181) 5.21 (.205) 1.80 (.071) 2.01 (.079) 2.59 (.102) 3.00 (.118) 0.48 (.019) 0.84 (.033) drain source gate dimensions in millimeters and (inches) drain 2.29 (.090) 2.69 (.106) 5.79 (.228) 6.20 (.244) 2.79 (.110) 3.18 (.125) 5.45 (.215) bsc 2-plcs. dimensions in millimeters and (inches) t-max tm (b2) package outline to-264 (l) package outline i d , drain current (amperes) r ds (on), drain-to-source on resistance (normalized) c, capacitance (pf) v gs (th), threshold voltage (normalized) t j , junction temperature (c) t c , case temperature (c) figure 8, on-resistance vs. temperature figure 9, threshold voltage vs temperature v ds , drain-to-source voltage (volts) v ds , drain-to-source voltage (volts) figure 10, maximum safe operating area figure 11, capacitance vs drain-to-source voltage -50 -25 0 25 50 75 100 125 150 -50 -25 0 25 50 75 100 125 150 1 5 10 50 100 600 .01 .1 1 10 50 1.21.1 1.0 0.9 0.8 0.7 0.6 30,00010,000 5,0001,000 500100 2.52.0 1.5 1.0 0.5 0.0 196100 5010 51 .1 dc line i d = 24.5a v gs = 12v apl602b2-l(g) e1 sac: tin, silver, copper downloaded from: http:///
|
